Infant Radiant Warmer / Baby Radiant Tube Heater

Infant Radiant Warmer / Baby Radiant Tube Heater

• The controller is based on Micro computerized system.
• Servo and Manual Modes.
• Self test system provided
• Large bright displays are easy to monitor and for viewing from a distance.
• Double digital display system provided to measure the Infant temperature and to set the required temperature
• Feather touch keys provided for easy operation.
• Bar graph LED system provided to indicate the heater output.
• Fault indication and alarms for
  
  • Baby probe failure
  • High temperature
  • Low temperature
  • High temperature cut off
  • Heater failure
  • Power failure
• Baby probe is made of highly sensitive sensor and interchangeable which does not need field calibration, the probe is made up of silicon sheathed cable, which allows easy cleaning.
• Single element imported CE marked ceramic heater placed in a parabolic reflector.
• Detachable baby trolley provided with large baby tray made up of stainless steel frame with three side acrylic collapsible walls.
• IV stand provided
• Trendelenburge / fowler system provided
• Unit is powder coated
• Observation lamp provided
• Monitor tray provided

PHYSICAL PARAMETERS

PHYSICAL PARAMETERS :
Length	:	700 mm
Width	:	430 mm
Working level from the ground	:	840 mm
Weight Approx	:	40 Kg
Castors	:	75 mm

RECOMMENDED ENVIORONMENTAL SPECIFICATIONS

Operating temperature range:	:	20o C to 33o C.
Storage Temperature range	:	-25o C to 60o C
Operating humidity range	:	0 - 100 % RH

SKIN TEMPERATURE

Range	:	32o C to 38o C
Accuracy	:	+ / - 0.2o C
Resolution	:	0.1o C
Probe Interchangeability	:	+ / - 0.2o C
Infant required temperature range	:	32o C to 38o C
Heater output controllable from 0 to 100 % in manual mode (continuously variable)

OBSERVATION LAMP

Halogen based

LECTRICAL SPECIFICATION

Electrical supply : 230 V AC + / - 10 % 50 Hz. Power consumption with heater at max output : 750 W.